Before approving furniture work, ask these 7 important questions about plywood, thickness, billing, hardware, finishing, and material specifications to avoid costly surprises.
Imagine this.
Your house construction is almost finished.
The painter is working.
Tiles are done.
And now the carpenter gives you a quotation.
You ask:
“कति लाग्छ?”
He gives you a price.
Then says:
“सस्तोमै राम्रो plywood लगाइदिन्छु।”
Sounds good.
But what exactly does “राम्रो plywood” mean?
Which brand?
Which grade?
What thickness?
Will you receive a bill?
What happens if the cabinet starts swelling or the hardware fails?
This is where many homeowners make a costly mistake.
They approve the quotation based on one thing:
The final price.
But a furniture quotation without clear specifications can be difficult to compare.
Here are seven questions worth asking before you say yes.
1. “Exactly Which Plywood Are You Using?”
Do not accept vague answers like:
- राम्रो quality हो
- branded हो
- सबैले यही लगाउँछन्
- चिन्ता नलिनुहोस्
Ask for the exact details.
You should know:
- Brand
- Product or grade
- Intended application
- Where it will be used
A wardrobe, kitchen cabinet, and wet-area cabinet may not require identical material specifications.
The important thing is knowing what is actually being installed.
Best practice:
Ask for the material details to be written into the quotation or work agreement.
2. “What Thickness Will You Use?”
Thickness can affect furniture construction, but simply saying:
“यो thick छ।”
is not enough.
Ask where different board thicknesses are planned.
For example, structural sections, cabinet shutters, shelves, and back panels may have different requirements depending on the design.
The important thing is transparency.
The thickness used should match what was promised.
If your quotation only says:
“Plywood furniture – Rs. X”
you may not know what you are actually paying for.
A better quotation separates the key specifications.
3. “Which Material Is Going Near Water?”
This question is especially important for:
- Kitchen sink areas
- Bathroom vanities
- Utility areas
- Balconies
Explain the actual environment.
Don’t simply say:
“Kitchen ko lagi plywood.”
Show the carpenter where water exposure may occur.
Ask how:
- Moisture will be handled
- Edges will be finished
- The cabinet will be protected from direct contact with water
The wrong material in the wrong location can become expensive later.
4. “Are You Giving Me the Exact Material I Paid For?”
This question may feel uncomfortable.
Ask it anyway.
Before installation, confirm the material that has arrived.
If possible:
- Check the board branding
- Compare with your agreed specification
- Keep the purchase documentation
- Ask for bills where applicable
You don’t need to become suspicious of every carpenter.
You simply need a clear system.
Good professionals generally prefer clear specifications because it prevents misunderstandings later.
5. “How Will You Finish the Edges?”
Many furniture problems do not begin in the middle of a board.
They begin at exposed edges and joints.
Ask:
- Which edges will be exposed?
- How will they be protected?
- What finishing method will be used?
- How will areas near moisture be handled?
Finishing is not just about appearance.
It can affect long-term maintenance.
Don’t spend all your time choosing the laminate colour while ignoring how the furniture is actually constructed.
6. “Which Hardware Is Included?”
A cabinet is not just plywood.
The hardware matters too.
Ask about:
- Hinges
- Drawer channels
- Handles
- Screws
- Locks
- Lift-up mechanisms
The furniture may look excellent on installation day.
But daily movement happens through the hardware.
Ask whether the quotation includes the exact hardware quality and quantity.
Again:
Get important details written down.
7. “What Exactly Is Included in This Price?”
This may be the most important question.
A low quotation can become expensive when additional costs appear later.
Clarify whether the price includes:
- Plywood
- Laminates
- Edge finishing
- Hardware
- Adhesives
- Labour
- Installation
- Transportation
- Additional design work
Don’t assume.
Ask.
A quotation should help you compare one proposal with another.
If one carpenter quotes a lower number but excludes hardware and finishing, the comparison is meaningless.
Compare complete scope, not just the headline price.
The Simple Rule: Don’t Compare Two Prices Until You Compare Two Specifications
Imagine two quotations.
Carpenter A:
Rs. X
Carpenter B:
Rs. Y
Which one is cheaper?
You cannot know yet.
First compare:
- Material
- Grade
- Thickness
- Hardware
- Finishing
- Labour
- Installation
- Additional charges
Only then are you comparing similar work.
Otherwise, you may be comparing two completely different products.
A Simple Pre-Work Checklist
Before approving furniture work, make sure you know:
☐ Exact plywood brand or specification
☐ Material type for each area
☐ Thickness where relevant
☐ Wet-area material planning
☐ Hardware specification
☐ Laminate and finishing details
☐ Edge treatment
☐ Labour and installation scope
☐ Additional charges
☐ Bill or documentation
Final Thoughts
A good carpenter is valuable.
And most homeowners are not expected to become plywood experts.
But you should never have to approve a major furniture project based on:
“Don’t worry, sabai ramro huncha.”
Ask questions.
Get important specifications written down.
Check materials before installation.
And compare complete quotations—not just the lowest number.
Because in home interiors, the cheapest quote can sometimes become the most expensive decision.
When selecting plywood for different parts of your home, consider the actual application, moisture exposure, and expected usage. You can then explore suitable CenturyPly Garjanwood products and discuss the final specification with your authorised dealer, carpenter, or interior professional.